Baby Monitor MonBaby Smart Button Body Motion Sensor MBB-01

Sleeping babies are at risk of "rolling over, stopping body movement, falling", etc.

[Smart button motion sensor MBB-01]
Notification number: 14B2X10050000005


do you know? SIDS (Sudden Infant Death Syndrome)
SIDS (Sudden Infant Death Syndrome) is one of the top 5 causes of infant death.

In the sleep of a newborn baby, there is a possibility that accidents such as SIDS (Sudden Infant Death Syndrome), suffocation, and falling, for which the cause cannot be identified, may occur.
One of the causes is the stoppage of body movement due to lying on the stomach.
It is said that the probability of death due to sleeping on the stomach is 16.6 times higher than sleeping on the back, and it will occur if you take your eyes off for a moment.
There is no established method to prevent SIDS, but there is data showing that lying on your back reduces the incidence of SIDS.


[MonBaby Smart Sensor]
MonBaby Advanced BabyMonitor
We can help you track your breathing movement, sleep position, and temperature!

Safe and comfortable wearable digital baby monitor.
It can be easily attached to parts such as children's clothes.

*This product is not a device that completely prevents sudden infant death syndrome (SIDS) or sleep disorders (sleep apnea, etc.).
The infant's condition is not determined only by the information on body movement from this product,
Parents and caregivers should always check directly. Delay in noticing abnormal conditions in infants,
It can also lead to serious conditions (serious condition, death, etc.).

[Product Features]
If you detect any abnormalities in your baby's sleeping state, you will be notified by the app at hand.

1.Notify your baby even if you are away!
A sensor detects the baby's body movements.
The alarm in the app at hand will notify you when your baby is sleeping, such as when your baby is sleeping, such as when you are doing housework, when your mother or father is sleeping, or when you are watching multiple children.

2. Because it is a batch type, it can be easily attached to children's clothes. It's also lightweight, so you can easily carry it with you when you travel.

3. There are many use results nationwide, such as nursery schools where it is necessary to watch over multiple babies.

Breathing movement, sleeping position, ambient (sensor batch) temperature.
If the temperature around your baby may be too hot or too cold,
Alerts are sent to your smartphone when irregular breathing patterns or unsafe sleeping positions are detected.

[Alert type]
1. Breathing alert Notification when body movement due to breathing is not detected.

2.Body movement alerts/Stomach alerts Notifications when you sleep on your stomach.

・Disconnection alert Notification when the connection between the sensor and the smartphone is lost.

・Notify when the fall alert sensor falls more than 90 cm.

・Battery alert Notifies you when the battery is low.

・Other functions You can also set alerts that notify you of tossing and turning and violent movements on the app.

【Product Description】
Set contents and accessories: Main body, main body cover for installation, battery mounting driver for accessories, lithium battery Target: 0-24 month old baby Main body size: about H38mm x W38mm x D9mm (when the cover is attached)
Warranty period: 1 year from purchase Supported OS: BlueTooth 4.0 (BLE) or higher iOS 11.0 or higher * Compatible with iPhone, iPad, and iPod touch, Android 5 or higher

【Product Details】
● Body dimensions and weight/dimensions: Length 38 x Width 38 x Thickness 9mm
・Weight: Approximately 10g (including batteries)

● Electrical rating
(1) Power supply: Coin type lithium battery (3V, CR-2032)
(2) Current consumption: <1.3mA

● Principle This product is used by attaching the main body to an appropriate position on the baby's abdomen, and using the acceleration sensor inside the main body to detect the baby's body movements. The body movement status of the detected infant can be checked on a smartphone or tablet with a dedicated app installed.

● Performance/sensor specifications: 3-axis acceleration sensor/output data rate (ODR): 1.56Hz to 800Hz

● Communication standard ・Bluetooth Ver. 4.0
・Operating frequency: 2400 MHz to 2483.5 MHz
・Output power: >=4dBm


[Purpose of use or effect]
This product is a sensor used to detect body movement.


[How to use]
1. Preparation
(1) Remove the main unit by pushing it out with your finger from the hole in the center of the main unit cover.
(2) Use the included screwdriver to remove the battery cover screw on the back of the main unit.
(3) Slide the battery cover to remove it, then insert the lithium battery (CR-2032) with the + side facing up.
(4) Slide the battery cover to close it, and then secure it with screws.

2. Mounting the main unit
(1) Place the body cover inside the baby's clothes (pajamas, maternity clothes, etc.) with the front side facing the baby's abdomen.
(2) Place the main unit face up on the outside of the baby's clothes so that it overlaps the main unit cover, and push it into the main unit cover with your fingers to secure it.
(3) Make sure that the main unit and the main unit cover are engaged and are securely attached to your clothes.

3. Removing the main unit
(1) Put your hand inside the baby's clothes and use your fingers to push the body out of the hole in the center of the body cover. After removing the main unit with your other hand, remove the main unit cover from inside the clothing.

*This product allows you to monitor your baby's body movements using a smartphone or tablet with a dedicated app installed. Detailed usage is described in the application operation guide.

<Precautions for usage, etc.>
・Use a CR-2032 lithium battery. Check the orientation of the electrodes and attach them correctly before use.
・After inserting the batteries, make sure that the battery cover is securely fastened with screws. Do not use if the battery cover is loose or detached.
・When using this product, first check the remaining battery power on the dedicated app and make sure that there is sufficient remaining battery power before starting to use.
・Do not use this product if the main unit or main unit cover is distorted, cracked, or damaged.
・When using this product, be sure to wear clothing that is the appropriate size for an infant (pajamas, maternity clothes, etc.). [There is a possibility that it may not be able to detect malfunction or body movement. ]
・Before starting monitoring, make sure that the body and body cover are engaged and attached securely to the baby's clothing. If the fabric of the clothing is too thick, it may not be possible to attach the main unit.
・This product is not suitable for co-sleeping infants or multiple infants sharing a bed. [It may be activated by detecting the body movement of others. ]
・This product cannot be used in an environment where there is external movement, such as when traveling in a stroller, car, or airplane. [The sensor may detect movement and malfunction. ]


[Precautions for use]
<Important basic precautions>
・Please read the instruction manual carefully before use and use this product correctly.
・Avoid using this product with other electric or electronic devices as much as possible, and pay attention to monitoring conditions. [Electromagnetic interference may cause communication failure or malfunction]
・Keep the product, button battery and screwdriver out of reach of children after use. [There is a risk of accidental ingestion or injury.] ]
・In order to monitor body movement, it is ideal for the infant to sleep on its back on a floor or futon that is not too soft. Keep the infant on its back during monitoring.
・Do not use this product if you cannot attach the main unit to your clothes securely even after following the usage instructions. [Your body movement may not be detected correctly. ]
* Be careful not to pinch the baby's skin when installing the main unit. After attaching the main unit, put your hand inside the baby's clothes and check that the skin is not caught before use.

<Other precautions>
・Do not drop the main unit or subject it to strong impact. [Failure or malfunction may occur.] ]
・This product is not waterproof. Do not submerge in water. If the surface gets wet, dry it immediately.
・Do not throw the battery into fire. [Risk of fire or explosion. ]
・When disposing of this product, follow the regulations of each local government.


[Storage method and validity period, etc.]
1. How to store ・When not in use, store the product with the main unit and main unit cover properly assembled.
・Store in a clean place, avoiding direct sunlight, extremely low or high temperatures.
2. Service life The service life of this product is 3 years. [Based on self-certification (manufacturer data). ]


[Matters related to maintenance and inspection]
When cleaning, wipe gently with a damp, clean cloth.

【Medical equipment】

・ Advertisement responsibility: Precious Care Co., Ltd.
TEL: 045-319-4905

・Manufacturer: MONDEVICES, INC.
225 W 34th St, New York, NY 10122 USA

・Importer name: Precious Care Co., Ltd. 〒231-0002
4-20-1 Kaigan-dori, Naka-ku, Yokohama-shi, Kanagawa
Fiennes Building Minatomirai 702

・Country of origin: China ・Product classification: general medical equipment

Home Health management At home Compact Safe Portable Sensor Inventory disposal Body movement sensor

precious care

*There are differences between the actual product and the product image.
Thank you for your understanding. The main body and accessories may have specifications changed by the manufacturer. In addition, we do not accept returns due to differences in the image, so we appreciate your understanding.