横濱薬専 / 株式会社プレシャスケア
Nebulizer Inhaler, Small, Mesh Type, Ultrasonic BCN-002, USB Powered, Battery, Large/Small Mask, Pouch Included, Children, Home Use, Asthma, Lungs, Breathing, Quiet, Domestic Inspection, General Medical Device Notification
- Regular price
- ¥11,000
- Regular price
-
- Sale price
- ¥11,000
- Unit price
- per
Couldn't load pickup availability
[How to use]
1. Installing batteries Push the battery cover of the main unit in the direction of the arrow, and insert two AA alkaline batteries in the direction of the plus and minus pictograms.
Replace the battery cover and close it firmly until it clicks.
※Notes
・Before installing the battery, make sure that the contact surface of the electrode part of the main unit is clean.
・Make sure that the positive and negative directions of the battery are correct, and do not confuse the polarity.
・Do not use batteries other than 1.5V AA alkaline batteries.
・Battery life is about 6 days when used for 15 minutes a day. (Depending on the viscosity of the chemical solution, etc.).
・Be sure to use the included USB cable and a commercially available mobile battery or a commercially available AC adapter for medical equipment to connect to an external power supply. (DC5V/1A).
* Do not charge the mobile battery at the same time while connecting to this unit.
2. Fill the chemical solution
After removing the chemical cup from the main unit, open the lid of the chemical cup and fill the chemical using the measuring cup as shown below.
After filling the liquid medicine, firmly close the lid of the liquid medicine cup and attach the liquid medicine cup to the main body.
3. Attach the chemical cup to the main unit
Attach the chemical cup by sliding it along the groove on the top of the main unit.
Fix the chemical cup by pushing it all the way in until the safety lock clicks.
When removing, pull out the chemical cup to the front of the main unit while pressing the release button on the back of the main unit.
4. Attach the inhalation mask or inhalation nozzle
Remove the nozzle cap from the tip of the suction cup nozzle.
Attach an inhalation mask to the tip of the nozzle. Make sure the up and down direction is correct, and push the tip of the nozzle in until it reaches the line inside the inhaler mask.
5. How to operate
Press the power switch once to turn on the power and start spraying.
When you finish inhaling, press the power switch once to stop nebulization and power off.
6. Care after use
After use, wash and disinfect the chemical cup and main body before storing.
※Washing method※
● Open the lid of the chemical cup and discard the remaining chemical solution.
● After washing the inside of the chemical cup with clean water, lightly wipe the surface. Next, pour a small amount of clean water (2-3 mL) into the solution cup and close the cup lid.
●If the power switch is held down for 5 seconds or longer, the display lamp will blink and the "CLEANING MODE" will appear. After about 2-3 minutes, press the power button to stop the operation. When "CLEANING MODE" is activated, all operations will be stopped for 10 minutes after the end.
●Remove the medicine cup and inhalation mask from the main unit. Rinse the medication cup and inhaler mask with clean water. (Do not wash the body with water.)
● If dirt or moisture remains on the main unit, wipe it off with gauze moistened with clean water before storage.
● After cleaning, dry completely before storing in a clean environment.
* Disinfection method *
●First, wash the medicine cup and the inhaler mask according to the normal washing method.
● Wipe each part gently with a soft cloth soaked in 75% alcohol.
● After wiping with alcohol, soak each part in clean water for 5 minutes.
●After disinfection, wash the medicinal solution cup and inhalation mask again according to the normal washing method, dry them completely, and store them in a clean environment.
7. Storage method
Remove the batteries when not in use for a long period of time.
When storing or carrying this product, store the main unit and all parts in the storage bag.
1. Installing batteries Push the battery cover of the main unit in the direction of the arrow, and insert two AA alkaline batteries in the direction of the plus and minus pictograms.
Replace the battery cover and close it firmly until it clicks.
※Notes
・Before installing the battery, make sure that the contact surface of the electrode part of the main unit is clean.
・Make sure that the positive and negative directions of the battery are correct, and do not confuse the polarity.
・Do not use batteries other than 1.5V AA alkaline batteries.
・Battery life is about 6 days when used for 15 minutes a day. (Depending on the viscosity of the chemical solution, etc.).
・Be sure to use the included USB cable and a commercially available mobile battery or a commercially available AC adapter for medical equipment to connect to an external power supply. (DC5V/1A).
* Do not charge the mobile battery at the same time while connecting to this unit.
2. Fill the chemical solution
After removing the chemical cup from the main unit, open the lid of the chemical cup and fill the chemical using the measuring cup as shown below.
After filling the liquid medicine, firmly close the lid of the liquid medicine cup and attach the liquid medicine cup to the main body.
3. Attach the chemical cup to the main unit
Attach the chemical cup by sliding it along the groove on the top of the main unit.
Fix the chemical cup by pushing it all the way in until the safety lock clicks.
When removing, pull out the chemical cup to the front of the main unit while pressing the release button on the back of the main unit.
4. Attach the inhalation mask or inhalation nozzle
Remove the nozzle cap from the tip of the suction cup nozzle.
Attach an inhalation mask to the tip of the nozzle. Make sure the up and down direction is correct, and push the tip of the nozzle in until it reaches the line inside the inhaler mask.
5. How to operate
Press the power switch once to turn on the power and start spraying.
When you finish inhaling, press the power switch once to stop nebulization and power off.
6. Care after use
After use, wash and disinfect the chemical cup and main body before storing.
※Washing method※
● Open the lid of the chemical cup and discard the remaining chemical solution.
● After washing the inside of the chemical cup with clean water, lightly wipe the surface. Next, pour a small amount of clean water (2-3 mL) into the solution cup and close the cup lid.
●If the power switch is held down for 5 seconds or longer, the display lamp will blink and the "CLEANING MODE" will appear. After about 2-3 minutes, press the power button to stop the operation. When "CLEANING MODE" is activated, all operations will be stopped for 10 minutes after the end.
●Remove the medicine cup and inhalation mask from the main unit. Rinse the medication cup and inhaler mask with clean water. (Do not wash the body with water.)
● If dirt or moisture remains on the main unit, wipe it off with gauze moistened with clean water before storage.
● After cleaning, dry completely before storing in a clean environment.
* Disinfection method *
●First, wash the medicine cup and the inhaler mask according to the normal washing method.
● Wipe each part gently with a soft cloth soaked in 75% alcohol.
● After wiping with alcohol, soak each part in clean water for 5 minutes.
●After disinfection, wash the medicinal solution cup and inhalation mask again according to the normal washing method, dry them completely, and store them in a clean environment.
7. Storage method
Remove the batteries when not in use for a long period of time.
When storing or carrying this product, store the main unit and all parts in the storage bag.
Share
